Switch networking case

High-efficiency elevator wireless monitoring project in Daxing Tiangongyuan Community, Beijing

图片3

Tiangongyuan Community is located in Tiangongyuan, Daxing, Beijing, with a total construction area of 254,305 and a total of 2,453 houses. This elevator wireless network camera monitoring project uses a total of 70 pairs of Fengrunda RD-S380QCPE 5G wireless bridges (transmission distance 1KM) to ensure clear, smooth, stable and reliable monitoring signals in the elevator.

client needs

· The surveillance video quality is smooth and clear, without intermittent or packet drops.

· The elevator monitoring system needs to work 24 hours a day, so the stability of the equipment is very important.

· When an abnormality occurs in the monitored elevator, you can respond immediately and call back the surveillance video recorded on the hard disk to find a breakthrough and effective evidence to solve the problem.

· Due to the particular installation location of the elevator monitoring equipment, the equipment is required to have a low failure rate and a self-repair function.

· There may be frequency band interference in the elevator environment, and the equipment used must be able to avoid interference.

solution

The space inside the elevator is small, so the elevator wireless monitoring device must have functions such as easy installation and simple maintenance. In order to better realize these functions, when we choose elevator wireless bridge monitoring equipment, we must choose equipment that is easy to install, has stable transmission and has low transmit power.

RD-S380QCPE wireless bridge has a maximum wireless rate of 150Mbps, complies with the 802.11a/n protocol, works in the 5GHz frequency band, and has an effective bandwidth of up to 60M per kilometer; 8dBi industrial-grade directional antenna, wider signal coverage; external PA and LNA, wireless Better performance. And it is simple and convenient to install and use, no configuration is required before leaving the factory, plug and play, and faster to install and use; it adopts a watchdog design, automatic detection, and automatic recovery when faults are found. Coupled with the 8KV lightning protection design, the RD-S380QCPE wireless bridge can be suitable for various application scenarios. Very popular among elevator wireless monitoring products.

 

 

 

Program features

· Clear and stable: The maximum wireless rate is 150Mbps, 8dBi industrial-grade directional antenna, external PA and LNA, Qualcomm solution, solid capacitor, the product has stronger stability, wider coverage and stronger wireless performance.

· Low failure rate, self-healing: watchdog design, automatic detection, and automatic recovery when faults are found.

· Avoid frequency band interference: Choose a more free and clean 5G frequency band to improve the stability of signal transmission.

· Cost saving: The project cycle is short, eliminating tedious wiring labor and wire costs; maintenance is convenient, the life is longer, and later maintenance and use costs are reduced.

installation site

 

 

 

 

 

Related Products

RD-S380QCPE 5G wireless bridge

 

· The effective bandwidth of 1 kilometer can reach 60M, and up to 10 cameras can be carried

· 8dBi industrial grade directional antenna, wider signal coverage

· Qualcomm solution, solid capacitor, product stability and longer life

· External PA and LNA for stronger wireless performance

· Watchdog design, automatic detection, automatic recovery when faults are found

· 8KV lightning protection to prevent signal interruption caused by bad weather

· Factory configuration-free, plug and play, faster installation and use

· Wireless maximum rate 150Mbps, 802.11a/n

Leave a Comment

Your email address will not be published. Required fields are marked *

0